Oregon Scientific BAR626U Getting Started, Batteries, Change Settings, Table Stand Or Wall Mount

EN

GETTING STARTED

BATTERIES

Batteries are supplied with this product:

Main unit	3 x UM-3	(AA) 1.5V batteries
Remote unit	2 x UM-4	(AAA) 1.5V batteries

Insert batteries before first use, matching the polarity (+ and -) as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. Press RESET after each battery change.

NOTE Do not use rechargeable batteries.

shows when batteries are low.

NOTE It is recommended that you use alkaline batteries with this product for longer performance.

Installing the batteries:

CHANGE SETTINGS

To change, time, calendar and language settings:

1.Press and hold MODE for 2 seconds to enter setting mode.

2.Press or to change settings. (To reach the

setting you want quickly, press and hold or .)

3.Press MODE to confirm.

TABLE STAND OR WALL MOUNT

Use the stand on the back of the main unit / remote sensor, or mount it on a wall with a nail.

Attaching the stand:

Using the wall mount:

UNIT

LOCATION

Main

Indoor Temperature Area

Remote

Outdoor Temperature Area

Using the remote sensor stand or wall mount:

4