Oregon Scientific BAR626 Weather Forecast, Temperature, Moon Phase, Reset System, Safety And Care

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius with 70 to 75 percent accuracy. The weather forecast is always displayed.

SUNNY	PARTLY	CLOUDY	RAINY
	CLOUDY

TEMPERATURE

This product can display current, minimum, and maximum temperature information collected by the re- mote sensors and main (indoor) unit.

Outdoor data is collected and displayed every 40 seconds. Indoor data is collected and displayed every 10 seconds.

SELECT TEMPERATURE UNIT

Slide the °C / °F switch into the desired location. The switch is located in the main unit battery compartment. The setting for the main unit overrides the remote sensor setting.

SELECT CHANNEL NUMBER

Press CHANNEL to switch between sensors 1-3.

The icon shows the selected sensor.

KINETIC-WAVE

ICON

Designated	Indoor	Remote	Remote	Remote
Display	Display	Display	Display	Display
		Channel 1	Channel 2	Channel 3

To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensor’s data will be displayed for 3 seconds. To end auto-scan, press CHANNEL or MEM.

NOTE For more information on the sensor see "Remote Sensor THN122N" Section.

EN

MINIMUM / MAXIMUM RECORDS

The MEM button is located in the main unit battery compartment. Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records. To clear the records, press and hold MEM for 2 seconds. A beep will sound to confirm that the memory has been cleared.

MOON PHASE

The Calendar must be set for this feature to work, see "Set Clock" section.

¥ Press	or	to view the moon phase for the next
or previous day.
¥ Press and hold		or	to scan quickly through the
years (2001 to 2099).

New Moon

Waxing Crescent

First Quarter

Waxing Gibbous

Full Moon

Waning Gibbous

Last Quarter

Waning Crescent

RESET SYSTEM

The RESET button is located in the main unit battery compartment. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor or clock).

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol-free, mild detergent. Avoid dropping the product or placing it in a high-traffic location.

7