Oregon Scientific BARM688 Sensor Data Transmission, Light Touch KEY-LOCK, To search for a sensor

5. Place the sensor within 30 m (98 ft) of the main unit	ICON	DESCRIPTION
using the table stand or wall mount.
		Main unit is searching for
		the sensor(s)
		Sensor 1 data received
	and “- -”	The sensor cannot be
		found

EN

The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.

NOTE We recommended that you use alkaline batteries with this product for longer usage and consumer grade lithium batteries in temperatures below freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:

Simultaneously, press and hold MEM and CH for 2 seconds.

The reception icon shown in the outdoor temperature area shows the status.

NOTE If the sensor is not found, check the batteries, obstructions, and remote unit location.

For best results:

•Place the sensor out of direct sunlight and moisture.

•Position the sensor facing main unit, minimizing obstructions.

•Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects.

•Position the sensor close to the main unit during cold winter months.

LIGHT TOUCH KEY-LOCK

When no key has been pressed for 1 minute, appears to indicate key-lock is activated. Press any key to disable.

5

BARM688_M_EN.indd 5

3/5/07 3:37:36 PM