EN
13
TIME AND DATE
The current time and date can be set sequentially.
To Set the Current Date and Time:
1. Enter Normal Altitude Display or Normal Barometer
Display.
2. Press and hold [TIME] for 2 seconds, the EU or US
indicator starts flashing.
3. Press [+] or [-] to select US for US format shown as
month / date or EU for European format shown as
date / month.
4. Press [TIME] again, the current month flashes.
5. Press [+] or [-] to increase / decrease the month
digits. For rapid acceleration of the digits, press and
hold.
6. Press [TIME] again, the current date flashes.
7. Press [+] or [-] to increase / decrease the date digit.
8. Press [TIME] again, the 12-hour or 24-hour indicator
starts flashing.
9. Press [+] or [-] to select between 12-hour or 24-hour
time format.
10.Press [TIME] again, the hour digit starts flashing.
11.Press [+] or [-] to increase / decrease the hour digit.
12.Press [TIME] again, minute digits start flashing.
13.Press [+] or [-] to increase / decrease the minute
digits.
14.Pressing [TIME] a last time to exit.
NOTE The unit will return to Normal Barometer Display
or Altitude Display if no buttons are pressed for 1 minutes
during setting sequence.
DAILY ALARM
The EB833 has a daily alarm that can be programmed to
activate at the same time each day.
To Set the Alarm Time:
1. Enter Alarm Time Display
2. Press and hold [TIME] for 2 seconds, the [ ] icon
will be displayed and the [ALARM] indicator and the
hour digits start flashing.
3. Press [+] or [-] to increase / decrease the hour digits.
4. Press [TIME] again, the minute digits flash.
5. Press [+] or [-] to increase / decrease the minute digit.
EB833(EN3) 8/31/04, 3:40 PM13