Oregon Scientific EB833 user manual Installing and Replacing of Battery

[BARO] Barometer Button

-Alternates between Barometric displays √ TIME Button

-Alternates between Time displays

[+ -] Button

-Changes the value of a setting

-Clears memories

-Activates / deactivates alarm

-Selects units of measure

-Switches from fast to slow sampling rate

≈ Battery Compartment

-Houses 2 (two) CR-2032 batteries

-RESET Button

∆Sensor Vents

-Openings for atmospheric sensitive sensors

≥ Neck Cord

-Facilitates carrying around the neck or attached to a rucksack or belt

Hand Grips

-Rubberized grips that prevent the unit from being accidentally dropped

Wall-Mount Bracket

- to mount unit to wall or vertical surfice

INSTALLING AND REPLACING OF BATTERY

The EB833 operates with 2 (two) CR-2032 Lithium batteries that are included with all new units. During initial packaging, the batteries were insulated with a red tape so as to maximize the shelf life of the product. Before use, remove the insulation tape by gently pulling.

Upon removal, the display will show a full-segment display for 3 seconds; it will then enter the Normal Altitude Display.

EN

FULL SEGMENT DISPLAY

3

EB833(EN3) 3 8/31/04, 3:40 PM