Grounding Point | In the event of electrostatic shock the connection of an insulated cable to the |
| grounding point to an earthed point protects the unit from excessive electrical |
| discharge. A grounding screw is provided in the package contents. |
Integrated Antenna | Built in 5.0 GHz flat panel |
|
|
Observing Safety Precautions
This equipment must be installed in compliance with local and national building codes, regulatory restrictions, and FCC rules. For the safety of people and equipment, only professional network personnel should install the bridge.
WARNING: To comply with FCC radio frequency (RF) exposure limits, a minimum
WARNING: To avoid possible injury or damage to equipment, you must use power supply equipment that is safety certified according to UL, CSA, IEC, or other applicable national or international safety requirements for the country of use. All references to power supply in this document refer to equipment meeting these requirements.
1 Unpacking the Bridge
Make sure that you have the following items, which are included in the package:
•One 3Com Outdoor 11a Building to Building Bridge and 11bg Access Point
•Mounting bracket and hardware
•One Weatherproof Category 5 network cable
•One Weatherproof Console to RS232 cable
•PoE power injector/ Ethernet connector and AC power cord
•One grounding screw, not attached
•This Quick Start Guide
•One
•One Warranty Flyer
•Optional: One
2 Preparing for Installation
It is advisable to connect and check the PoE connection, Ethernet cables, and LEDs before installing the bridge in a
Installation Item | Description |
|
|
Cabling | Make sure that standard Category 5e cable with |
| installed at the site before you install the bridge. |
Power Requirements | Power should be supplied via the 3Com proprietary POE injector. |
3
