3Com 3CRWEASYA73 quick start Mounting the Bridge, Using the Pole-Mounting Bracket

IP Address	Record the bridge MAC address in a safe place before the bridge is installed in a
	hard-to-reach location.
	The MAC address is printed on the back of the bridge. Additional IP address labels
	are shipped with the bridge.
Location	The WL-575 bridge must only be installed outdoors. It is not for indoor use. The PoE
	injector is for indoor use only. Plan your equipment location accordingly.

3 Mounting the Bridge

The bridge can be mounted on the following types of surfaces:

•Pole

•Wall

.

CAUTION: The bridge is intended for outdoor use only. Do not install the bridge indoors.

Using the Pole-Mounting Bracket

Perform the following steps to mount the unit to a 2 to 3 inch diameter steel pole or tube using the mounting bracket:

1Place the V-shaped part of the bracket around the pole and tighten the securing nuts just enough to hold the bracket to the pole. (The bracket may need to be rotated around the pole during the antenna alignment process.)

V-Shaped bracket

4