EN
5.Press [+] or
6.Press [ALT], and proceed to the accumulative vertical ascent / decent memory. The subsequent accumulative vertical ascent / decent digits flash.
7.Press [+] or
8.Press [ALT] a last time and the unit returns to the Altitude Max (or Min) Memory Display.
NOTE The EB833 will return to Altitude Max/Min Memory Display if no buttons are pressed for 1 minute.
THE ALTITUDE ALARM
The Altitude Alarm can be set to activate when a specific altitude is reached.
To set the altitude alarm:
1Enter Altitude Alarm Display.
2.Press and hold [ALT] for above 2 seconds. The 
indicator will display.
3.Press the [+] and
4.Press [ALT]
5.Press [+] or 
indicator disappears) or [+] or 
indicator appears).
6.Press [ALT], the ALTALARM indicator stops flashing.
The 
indicator will appear and the alarm will
activate at the specified elevation.
7.Press [ALT] again and the Altimeter exits the setting sequence. If the alarm is set to activate at a specified altitude, the 
will be displayed.
NOTE The unit will return to the Altimeter Display if no buttons are pressed for 2 minutes.
The altitude alarm setting ranges is between
ALTITUDE SAMPLING RATE
The EB833 automatically samples altitude level at a rate of 2 seconds or 15 minutes.
When detecting a significant change in altitude, the unit will automatically increase the Altitude Sampling Rate to
When maintained at the same elevation for 10 minutes or longer, the device will automatically decrease the rate at which altitude samples are taken.
To manually force a change in the frequency at which altitude samples are taken:
1.In Normal Altimeter Display.
2.Press and hold (+) for about 2 seconds. The Altitude Sampling Rate will increase to
3.Press and hold
8
EB833(EN3) | 8 | 8/31/04, 3:40 PM |
