Oregon Scientific EMR899HGN Transmission Collision, HOW to USE the Table Stand or Wall Mounting

TRANSMISSION COLLISION

Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmis- sion and reception of temperature readings will resume once the interference recedes.

NOTE ON °C AND °F

EN

HOW TO USE THE TABLE STAND OR

WALL MOUNTING

The main unit has a retractable table stand, which when flipped open, can support the unit on a flat surface. Or you can flip close the stand and mount the unit on a wall using the recessed screw hole.

As for the remote unit, it comes with a wall-mount holder and a removable stand. Use either to hold the unit in place.

Main unit Wall-mount Table Stand

The unit of temperature display is selected on the °C/°F slide switch.

Select °C for Centigrade or °F for Fahrenheit.

Note that the remote temperature display on the main unit is dominated by the selection on the °C/°F slide switch of the main unit. Whatever the display units of the remote sensors are, they will be automatically converted to the chosen one of the main unit.

Remote unitWall-mount Table Stand

LOW BATTERY WARNING

When it is time to replace batteries, the respective low-battery indicator will show up when the respective channel is selected. The battery level of the main unit will be shown on the indoor tempera- ture when it is running low.

9

EMR899_EN_R3 9 8/30/04, 11:36 AM