GE 810 manual Installing the Phone, Installing the Handset Battery, Insert the batteries

Installing the Phone

Installing the Handset Battery

NOTE: You must install the handset batteries before using the cordless handset.

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved model BYD NiMH H-AAA 900mAh 1.2V, rechargeable Nickel-metal Hydride AAA batteries, which are compatible with this unit.

1.Locate batteries and battery door which are packaged together inside a plastic bag and are separate

from the handset.

2.Locate the battery compartment on the back of the handset.

3.Insert the batteries.

4.Close the battery compartment by pushing the door up until it snaps into place.

5.Plug the AC power adaptor of the charge cradle to an electrical outlet.

4.Place the handset in the charge cradle. The CHARGE indicator turns on, verifying the battery is charging.

Allow handset to charge for 16 hours prior to first use. If you do not properly charge the handset, battery performance is compromised.

12