GE 810 manual Base Station

Base Station

1.Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your base/gateway on a level surface near your high speed internet connection.

NOTE: If your computer or other equipment is occupying all available internet connections you will need to purchase a router.

2.Plug one end of the telephone line cord into the jack on the back of the base/gateway and the other end into a modular jack.

NOTE: Landline connection is not necessary for Skype usage.

IMPORTANT NOTE: Emergency calls via the landline are only possible if power is applied to the base station and the landline is properly connected.

3.Connect the ethernet cable to the jack in the base/ gateway and to your internet connection.

4.Plug the AC power converter into the electrical outlet and the DC connector into the jack on the back of the base/gateway.

CAUTION: Use only the SALOM Model SSW- 1328US power adaptor that came with this unit. Using other power adaptors may damage the unit. This power adaptor is intended to be correctly orientated in a vertical or floor mount position.

13