Oregon Scientific user manual Marathon Walker, Model PE903, Target

Marathon Walker

MODEL: PE903

USER MANUAL

EN

INtRODUctION

Thank you for selecting the Oregon ScientificTM Marathon Walker (PE903). The PE903 is a 3D sensor type pedometer that can detect steps in any dimension it is carried. It is equipped with clock, 1-day memory, step, distance and calorie counter functions.

While you go about your daily tasks, the Marathon Walker (PE903) is always by your side monitoring your progress and giving you (sometimes witty) feedback. Set your target and go.

IMPORtANt Do not immerse the pedometer in water.

cONtROL bUttONS

1

2

3

1.SEt: Confirm and move to next setting option

2.DISP : Toggle between sub modes; increase values

3. MODE: Toggle between main modes; decrease values

LcD

1 2 3 4 5 6 7 8 9 10

1.Displays mode banners, steps and time

2.Displays number of steps, calorie reading or distance walked

3. : Indicates distance walked is displayed

4. : Indicates calories burned is displayed

5. : 12 hour clock

6. : Indicates battery power is low

7. : Indicates step counter is on / Indicates steps walked is displayed

8. : Indicates exercise timer is displayed

9. : Indicates you are in Memory Mode / Indicates Memory Mode is on / activated

10. : Indicates distance target is set

GEttING StARtED

ActIvAtE PEDOMEtER (fIRSt-tIME USE ONLy)

1.Pull plastic strip to remove from unit.

2.Press and hold any key until the screen is activated.

3.The unit will automatically prompt you to set your user profile. Refer to Setting Mode Steps 3-5.

To effectively use the pedometer for calculating calorie burned (based on step count and user body weight) and distance walked (based on step count and length of user’s stride), you are advised to set the time and your user data in the Setting Mode.

The unit will automatically set a 10 km target the first time it is switched on or after each battery change.

cARRyING tHE PEDOMEtER

The PE903 can be carried around the neck or in pockets and handbags by using the adjustable strap provided.

bAttERy REPLAcEMENt

The pedometer uses a CR2032 3V battery, which has already been installed.

Indicates battery power is low.

to replace battery:

1.Use a small Phillips screwdriver to remove battery compartment lid. Once opened, please keep the screw in a safe place to avoid losing it.

2.Remove the old battery and insert the new one, matching the polarities.

3.Replace the lid by screwing it back into place using a

Phillips screwdriver.

NOtE When the battery compartment is opened or battery is replaced, all data in the pedometer will be reset.

IMPORtANt Remember to set the time and your user data after every battery replacement.

OPERAtION MODES

The PE903 has 4 modes of operation. Press MODE to navigate between these modes when banner is displayed.

DAILy MODE

In the Daily Mode, you can:

•view the current step count and distance walked

•calories burned

•calendar / clock

Press DISP to toggle between displays:

tARGEt MODE

In the Target Mode, you can view:

•the target step and distance

•the completed time and distance (already covered)

•the time and distance remaining to complete set target

NOtE Unit automatically toggles between screen displays.

Target:

Steps you wish to accomplish Distance you wish to accomplish

Time already completed Distance already completed

Time you have to reach target Distance remaining to reach target

Daily Mode banner

Default screen (Daily Mode) Current step count Distance walked

tIP Press MODE to jump to Daily Mode default screen.

MEMORy MODE

In the Memory Mode, you can view:

•the step / distance walked on previous day

•accumulated step / distance walked

•accumulated time / calories burned

NOtE Unit automatically toggles between screen displays.

Data from previous day ( )

Steps recorded

Distance recorded

Today’s record ( ) Accumulated steps walked Accumulated distance walked

Accumulated time Accumulated calories burned

Daily Mode banner

Default screen (Daily Mode) Current step count Distance walked

tIP Press MODE to jump to Daily Mode default screen. to reset records:

The pedometer is designed to automatically reset when the current step counter reaches 999,999. This will also reset the target. Please set target distance again.

Alternatively, setting a new target distance will also reset the current step counter and return it to 0.

SEttING MODE

In the Setting Mode, you can set :

•Target distance / finish time

•Clock / calendar

•User’s weight and measurement unit (kg / lb); stride length and measurement unit (cm / in)

NOtE Once measurement unit has been set in Stride (User profile sub setting), all other units will automatically follow the same format (imperial / metric).

1.Press SEt to enter the Setting Mode.

2.Press DISP to toggle between sub modes (Target /

Time & distance / User profile).

3.Press SEt to enter individual setting.

4. Press DISP to increase values or MODE to decrease values. You can press and hold these buttons to rapidly change the values.

5.Press SEt to confirm and move to next setting.

Sub-mode		Item	Setting Options
		Dist	10/25/42 km
			(6.21 / 15.5 / 26 mi)
TARGET
		Finish	Increments of 1 hour (up to 5
			hours) You can only change
		time
			this when setting target.
		Hour	12/24
		format
		Hour	0 - 24
		Minute	0 - 60
TIME &		Year	2000 - 2050
DATE
		Display	D / M or M / D
		Format
		Month	Jan - Dec
		Day	1 - 31
		Stride	Unit in cm / in
USER			Length
PROFILE		Weight	Unit in lb / kg
			Weight
NOtE	You can press SEt to skip through settings.

ANIMAtIONS

This unique feedback feature motivates you to try harder and reminds you of your set target.

Once target has been set, the following graphics may be displayed:

Other animations (unrelated to target):

Prior to entering sleep mode (to conserve energy)

	950,000 steps
	achieved
Prior to
reset (when
no target
has been	System will
set)	soon reset,
	keep on
	walking!

NOtE To conserve energy, the built-in sleep mode will activate when unit detects no movement. During sleep mode, the LCD screen will be blank. To return to normal mode, press any button or walk a few steps.

SPEcIfIcAtIONS

Real time clock	12 / 24 format with
	hour / minute
Step measurement range	0 – 99,999 steps
Distance measurement range	0 – 9999.99 km
	(0 – 621 miles)
User adjustable stride length	28 – 152 cm
	(11 – 60 inches)
Calorie measurement range	0 – 99,999 kcal
Body weight range	29 – 154 kg
	(64 – 340 pounds)
Exercise timer range	99 hr 59 min 59 sec
Resolution	0.1°C / 0.2°F
Power	1 x CR2032 3V battery
Operating temperature	-10°C to 40°C
	(14°F to 104°F)
Storage temperature	-20°C to 60°C
	(-4°F to 140°F)

PREcAUtIONS

To ensure you use your product correctly and safely, read these warnings and the entire user manual before using the product:

•Use a soft, slightly moistened cloth. Do not use abrasive or corrosive cleaning agents, as these may cause damage. Use lukewarm water and mild soap to clean the device thoroughly after each training session. Never use the product in hot water or store it when wet.

•Do not subject the product to excessive force, shock, dust, temperature changes, or humidity. Never expose the product to direct sunlight for extended periods. Such treatment may result in malfunction.

•Do not tamper with the internal components. Doing so will terminate the product warranty and may cause damage. The main unit contains no user-serviceable parts.

•Do not scratch hard objects against the LCD display as this may cause damage.

•Take precautions when handling all battery types.

•Remove the batteries whenever you are planning to store the product for a long period of time.

•When replacing batteries, use new batteries as specified in this user manual.

•The product is a precision instrument. Never attempt to take this device apart. Contact the retailer or our customer service department if the product requires servicing.

•Do not touch the exposed electronic circuitry, as there is a danger of electric shock.

•Check all major functions if the device has not been used for a long time. Maintain regular internal testing and cleaning of your device. Have your device serviced by an approved service centre annually.

•When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste.

•Due to printing limitations, the displays shown in this manual may differ from the actual display.

•The contents of this manual may not be reproduced without the permission of the manufacturer.

NOtE The technical specifications for this product and the contents of the user manual are subject to change without notice.

NOtE Features and accessories will not be available in all countries. For more information, please contact your local retailer.

AbOUt OREGON ScIENtIfIc

Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products.

If you're in the US and would like to contact our Customer Care department directly, please visit:

www2.oregonscientific.com/service/support.asp

For international inquiries, please visit: www2.oregonscientific.com/about/international.asp

EU-DEcLARAtION Of cONfORMIty

Hereby, Oregon Scientific, declares that this Marathon Walker (Model: PE903) is in compliance with EMC directive 89/336/CE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.

Current step count

Distance walked

Calories burned Exercise time (Exercise timer is displayed)

Clock

Calendar

tIP Press MODE to jump to Target Mode.

Every 24 hours

No movement detected after 1 hour

Fail to complete target distance within target timeframe

Successfully complete target distance

Hey C’mon let’s walk

LL-AA-ZZ-YY! C’mon let’s move!

C’mon, try that challenge again

Congratula- tions! You’re the marathon champ!

Good job! Let’s go for (25 / 42) km!

Y? Press SEt

Press SEt to Set target Or

Press DISP to jump to Daily Mode