EN
2.Move it to the “AUTO” position to enable continuous backlight controlled by light intensity. When activated, the backlight will be on whenever the unit perceives that the room is dark.
3.The Light Sensitivity knob switch is located in the battery compartment. Rotate to adjust.
E OI
LIGHT SENSOR
PROJECTOR
This product has a
NOTE The maximum projection range is 2 meters
(6 feet). The image gets larger the farther you display it.
PROJECT TIME / ALARM STATUS
In a darkened room, press SNOOZE/LIGHT to display the time and alarm status for 5 seconds.
FLIP IMAGE
Press SNOOZE/LIGHT again while the projector is on.
4.When activated, the continuous backlight will be half as bright as usual. To achieve full brightness, press SNOOZE/LIGHT.
ROTATE IMAGE
The ROTATION switch is located on the back of the unit. Rotate to adjust.
18
PS M02 English R18 op | 18 | 7/24/03, 11:56 AM |
Black
