Oregon Scientific PS-M02U user manual Set Or Change The Clock, Set Alarm, Snooze

SET OR CHANGE THE CLOCK

1.Press SELECT to switch to the Clock Mode. The time will flash.

2.Press and hold SELECT for 2 seconds to enter the setting mode.

3.Select the 12/24-hour format, hour, and minute. Press UP or DOWN to change the setting. Press SELECT to confirm.

EN

SET ALARM

1.Press SELECT several times until the Alarm area flashes.

2.Press and hold SELECT for 2 seconds to enter the setting mode.

3.Select the hour, minute, melody (1 - 7) and volume level (Lo or Hi). Press UP or DOWN to change the setting. Press SELECT to confirm.

4.Press SELECT again when you are finished.

ALARM

When activated, the Melody Alarm starts quietly, then gradually becomes louder. It shuts off after two minutes. The LCD display lights up for the first

8 seconds.

SNOOZE

Press the SNOOZE/LIGHT button the top of the unit to temporarily disable the alarm for 8 minutes. The alarm icon will blink while Snooze is activated.

11

PS M02 English R18 op 11 7/24/03, 11:56 AM

Black