EN
the selected sensor. To clear both the indoor thermometer and selected sensor records, press and hold MEM for 2 seconds.
A beep will sound to confirm that the memory has been cleared.
The trend line is shown next to the Temperature reading.
Trend | Rising | Steady | Falling |
ICON
The RESET buttons are located in the battery compartments for the main unit and sensors. Press RESET when you change the batteries and whenever
performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor.
When you press RESET, all settings will return to default value, and you will lose all stored information.
NOTE
Clean the product with a slightly damp cloth and alcohol-
10
free mild detergent. Avoid dropping the product or placing it in a
This product is designed to give you years of service if
handled properly. Observe the following guidelines:
•Never immerse the product in water. This can cause electrical shock and damage the product.
•Do not subject the main unit to extreme force, shock, or fluctuations in temperature or humidity.
•Do not tamper with the internal components.
•Do not mix new and old batteries or batteries of different types.
•Do not use rechargeable batteries with this product.
•Remove the batteries if storing this product for a long period of time.
•Do not scratch the LCD display.
Do not make any changes or modifications to this product. Unauthorized changes may void your right to productuse the andproductcontents. Theoftechnicalthis user specificationguide are subjectof thisto change without notice. Images not drawn to scale.
