Oregon Scientific RAR186 specifications The reception icon shown in the Temperature Area

EN
	The reception icon shown in the Temperature Area
	shows the status.
	To search for a sensor, press and hold MEM and
	ICON	DESCRIPTION
		Main unit is searching for
		sensors.
		At least 1 channel has
		been found.
		Channel 1 is selected (number
		will change depending on the
		sensor you select)
	--- shows in Temp	The selected sensor cannot
	Areas	be found. Search for the
		sensor or check batteries.

CHANNEL for 2 seconds.

If the sensor is still not found, check the batteries, obstructions, and remote unit location.

NOTE

Signals from household devices such as doorbells, electronic garage doors, and home security

systems may cause temporary reception failure. This is

NOTE

normal and does not affect general product performance. The reception will resume once the interference ends.

of week in English, German, Italian, or French.

Manually set the clock following the "Set Clock" instructions (below).

1.Press and hold MODE for 2 seconds. The Clock Area will blink.

2.Select the hour, minute, date, month, language, day and time zone offset (-12 to +12). Press UP or DOWN to change the setting. Press MODE to confirm.

The Language settings are (E) English, (D) German, (F) French, and (I) Italian

NOTE

Press MODE to toggle between Clock with Seconds, Clock with Weekday, Clock with Weekday and Zone Time, and Zone Time with Weekday and Zone Calendar.

This product is equipped with a 2-minute crescendo alarm.

This product shows the current time, time zone, and day 8