Oregon Scientific RM622PA user manual Getting Started, Clock, Batteries, Ac Adaptor

EN

GETTING STARTED

BATTERIES

Insert batteries before first use, matching the polarity (+ and -) as shown in the battery compartment. Press RESET after each battery change.

shows on the LCD when battery power is low. Replace batteries as soon as possible to maintain optimal performance.

NOTE For optimal performance, use alkaline batteries with this product and do not use rechargeable batteries.

AC ADAPTOR

The main unit has a 3.0V AC/DC adaptor with jack, which provides continuous clock projection.

CLOCK

The clock automatically synchronizes the current time and date when it is brought within range of the WWVB- 60 radio signal (60 kHz) generated from Fort Collins, Colorado. For more information, please visit: http://www. boulder.nist.gov/timefreq/stations/radioclocks.htm.

NOTE Initial reception takes 2-10 minutes and begins when you first set up the unit, and also whenever you press RESET. Once complete, the reception icon will stop blinking.

4