Oregon Scientific RM888PA user manual About The Alarm, How To Use The Daily Alarm, Snooze Function

12. Press [MODE] to save the changes and exit. If changes are made during the process, the seconds will reset and start from zero.

The unit will also save all changes and return to normal display automatically after the unit has been left idle for a minute or when [ALARM] is pressed.

ABOUT THE ALARM

To set the alarm,

1.Press [ALARM] to enter the Alarm mode.

2.Press and hold [ALARM] for 2 seconds.

3.Use [▲]/[▼] to enter the hours.

4.Press [ALARM].

5.Use [▲]/[▼] to enter the minutes.

6.Press [ALARM].

The alarm will be automatically activated. The icon will appear on the digital display and the Alarm-on icon will be displayed on the analog display. To deactivate the alarm, press [▲]/[▼] when the alarm time is displayed.

GB

HOW TO USE THE DAILY ALARM

The alarm will go off for 2 minutes in a two-step crescendo pattern. The alarm-on indicators will flash, the back-light and the clock projection will be activated for 5 seconds. To mute the alarm, press

any key. Pressing [SNOOZE/] will activate the snooze function.

SNOOZE FUNCTION

When the snooze function is activated, the alarm will be muted temporarily and set off again after 8 minutes. To disable the snooze function, press [ALARM].

SECTION 3

ADDITIONAL INFORMATION

THE RESET BUTTON

The [RESET] button is used to enhance synchronization of signals after battery replacement or when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values.

7