EN
GETTING STARTED
This product can be used with up to 2 remote units to transmit outdoor temperature and humidity data to a main (indoor) unit. The measurement unit (° C or ° F) and channel number (1, 2, or 3) switches are located in the battery compartment, and should be set prior to installation.
NOTE Additional remote units sold separately.
SET UP
1.Place remote unit as close as possible to the main unit.
2.Remove the battery compartment lid. (You will need a small Phillips screwdriver.)
3.Assign a Channel Number. If
you are using more than one |
|
|
| RESET |
1 | 2 | 3 | ||
|
|
|
|
|
remote unit, select a different | CHANNEL | |||
|
|
|
| |
channel number for each unit. |
|
|
|
|
4. Set the measurement unit. |
|
|
|
|
1 | 2 | 3 |
|
5. Insert the batteries. Match
RESET
CHANNEL
the polarity, as shown in the battery
4