Panasonic TH-5065PF10UK manual Location setting When Portrait Setup on, Viewing Area and Location

When PORTRAIT SETUP is “OFF”:

Represent an area of the selected LOCATION at a normal brightness and darken the rest of it.

Notes:AI-SYNCHRONIZATION

• When the input signal is FULL, VIEWING AREA is fixed to “16:9”.

• When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.

Press to select each function.

Press to select VIEWING AREA or LOCATION.

LOCATION

VIEWING AREA

SEAM HIDES VIDEO

PORTRAIT SETUP

OFF

1

16:9

OFF

OFF

SET UP for PORTRAIT

5 VIEWING AREA / LOCATION
VIEWING AREA: Set a mode of image division for PORTRAIT function.
LOCATION: Set a location of image to be displayed for PORTRAIT function.	PORTRAIT SETUP

LOCATION setting

When PORTRAIT SETUP “ON”:

Display the image of the selected LOCATION.

VIEWING AREA and LOCATION

The mode of image division and the LOCATION by setting of VIEWING AREA is as follows.

VIEWING AREA: 16:9

LOCATION 1 LOCATION 2 LOCATION 3

Undisplayed area (48 dots)

VIEWING AREA: 4:3

LOCATION 1 LOCATION 2 LOCATION 3

Suitable to display FULL images. NORMAL (4:3) images extend transversely.

Both right and left sides of the image are cut by 48 dots.

4:3 images are displayed without changing aspect ratio.

Although the images of each LOCATION overlap, you can adjust POS. / SIZE to display the image normally. (see page 22)

6	AI-SYNCHRONIZATION
Adjust to equalize the brightness of the 3 displays when using PORTRAIT setting.
		Press to select AI-SYNCHRONIZATION.
							PORTRAIT SETUP
		Press to select “OFF” , “ON”.
							PORTRAIT SETUP	OFF
							SEAM HIDES VIDEO	OFF
			The brightness depends on		Equalize the brightness of
							VIEWING AREA	16:9
				each display’s setting.		all the displays.
							LOCATION	1
							AI-SYNCHRONIZATION	OFF

Note: OFF ON

If you set AI-SYNCHRONIZATION to ON, the following menus will be unavailable and these settings will be fixed to the initial values.

PICTURE menu: COLOR, TINT

7 Press twice to exit from SET UP.

41