Panasonic TH-5065PF10UK Connections, Optional Terminal, Board Insert Slot Equivalent of Dual

Connections

TH-65PF10UK

When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation.

Speakers (Optional accessories)

Speaker

terminal (L)

Speaker terminal (R)
	AC cord connection (see page 14)

– AC cord fixing

1
2	1
	2

Note:

Make sure that the AC cord is locked on both the left and right sides.

1Plug the AC cord into the display unit.

Plug the AC cord until it clicks.

2Fix the AC cord with the clamper which is attached to the unit.

Close

Push until the hook clicks.

Open

2. Pull off.

1.Keep the knob pressed.

Unplug the AC cord

Unplug the AC cord pressing the two knobs.

Note:

When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first.

–Cable fixing bands Secure any excess cables with bands as required.

Pass the attached cable fixing band through the clip as shown in the figure.

To secure cables connected to Terminals, wrap the cable fixing band around them then pass the pointed end through the locking block, as shown in the figure.

While ensuring there is sufficient slack in cables to minimize stress (especially in the power cord), firmly bind all cables with the supplied fixing band.

To tighten:	To loosen:
	Push the catch

	Pull
1	2					Pull
	R AUDIO	L	PR/CR/R PB/CB/B	Y/G		AUDIO
	COMPONENT/RGB IN
SLOT1	SLOT2		SLOT3	PC	IN	SERIAL

	Optional Terminal	Dual HDMI Terminals	COMPONENT/RGB IN and
	Board Insert Slot	(equivalent of Dual	Audio IN Terminals (equivalent
	(covered)	HDMITerminal Board	of BNC Component Video
		(TY-FB10HMD))	Terminal Board (TY-42TM6A))
		(see page 13)	(see page 13)
Note:

At factory shipment, Terminal boards are installed in SLOT 2 and SLOT 3.

From EXTERNAL monitor terminal on Computer (see page 11)

From SERIAL Terminal on Computer (see page 12)

10