SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input | SET UP | 1/2 | |
signal mode.(“SIGNAL [VIDEO]” menu is displayed.) |
|
| |
| SIGNAL |
| |
| |||
Press to select the “COLOR SYSTEM” or “Panasonic |
| RGB | |
AUTO”. | INPUT LABEL | PC | |
| |||
| POWER SAVE | OFF | |
Press to select each function. | STANDBY SAVE | OFF | |
POWER MANAGEMENT | OFF | ||
If the image becomes unstable: | AUTO POWER OFF | OFF | |
OSD LANGUAGE | ENGLISH (US) | ||
| |||
With the system set on Auto, under conditions of low | Press ACTION ( ) button | ||
level or noisy input signals the image may in rare | |||
|
| ||
cases become unstable. Should this occur, set the | SIGNAL | [ VIDEO ] | |
system to match the format of the input signal. | 3D Y/C FILTER (NTSC) | ON | |
| |||
| COLOR SYSTEM | AUTO | |
| 3 : 2 PULLDOWN | OFF | |
| Panasonic AUTO (4 : 3) | NORMAL | |
| VIDEO NR | OFF | |
Mode |
|
| Function |
|
|
COLOR SYSTEM | Set the color system to match the input signal. When selecting “AUTO”, the color system is automatically | ||||
| selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on | ||||
| the attached terminal board. To display M.NTSC signal, select “M.NTSC” in COLOR SYSTEM. | ||||
| AUTO | PAL | SECAM | M.NTSC | NTSC |
|
| ||||
Panasonic AUTO | Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is selected. | ||||
(4 : 3 ) | If you would like to view 4:3 images in Just format, set to “JUST”. |
| |||
Note:
Panasonic AUTO does not function when BNC Dual Video Terminal Board
3:2 PULLDOWN
3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second. |
|
|
|
|
|
If the picture is not stable, turn the setting to OFF. |
| SET UP | 1/2 |
| |
Notes: |
|
|
|
|
|
| SIGNAL |
|
|
| |
When ON, this setting only affects the following signal input: |
|
|
|
| |
|
|
|
| ||
|
| ||||
• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal. |
|
|
| RGB |
|
• 525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal. |
|
|
|
|
|
| INPUT LABEL |
| PC |
| |
|
|
|
|
| |
| POWER SAVE |
| OFF |
| |
|
|
|
|
|
|
|
| STANDBY SAVE |
| OFF |
|
|
|
|
|
|
|
|
| POWER MANAGEMENT |
| OFF |
|
|
|
|
|
|
|
|
| AUTO POWER OFF |
| OFF |
|
|
|
|
|
| |
|
| OSD LANGUAGE | ENGLISH (US) |
| |
|
|
|
|
|
|
Press to select 3:2
Press ACTION (
) button
1
2
PULLDOWN.
Press to set ON/OFF.
Press to exit from adjust mode.
| SIGNAL |
| [ VIDEO ] | |||
|
|
|
| |||
| 3D Y/C FILTER (NTSC) |
| ON |
|
|
|
|
|
|
|
|
|
|
| COLOR SYSTEM |
| AUTO |
|
|
|
|
|
|
| |||
| 3 : 2 PULLDOWN |
| OFF |
| ||
|
|
|
|
|
|
|
| Panasonic AUTO (4 : 3) |
| NORMAL |
|
|
|
|
|
|
| |||
| VIDEO NR |
| OFF |
| ||
|
|
|
|
|
|
|
| SIGNAL | [ COMPONENT ] | ||||
|
|
|
| |||
| 3 : 2 PULLDOWN |
| OFF |
| ||
|
|
|
|
|
|
|
| VIDEO NR |
| OFF |
| ||
SIGNAL | [ RGB ] |
|
|
SYNC | AUTO |
|
|
3 : 2 PULLDOWN | OFF |
|
|
VIDEO NR | OFF |
SIGNAL | [ Digital ] |
3 : 2 PULLDOWN |
|
OFF | |
|
|
VIDEO NR | OFF |
44
