Safety Precautions / Maintenance

WARNING

Setup

Do not place the Plasma Display on sloped or unstable surfaces.

• The Plasma Display may fall off or tip over.

Do not place any objects on top of the Plasma Display.

If water spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma Display, please consult an Authorized Service Center.

Do not cover the ventilation holes.

Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.

Transport only in upright position!

Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.

If using the pedestal (optional accessory), leave a space of 3 15/16” (10 cm) or more at the top, left and right, 2 3/8” (6 cm) or more at the bottom, and 2 3/4” (7 cm) or more at the rear. If using some other setting-up method, leave a space of 3 15/16” (10 cm) or more at the top, bottom, left and right, and 2 3/4” (7 cm) or more at the rear.

AC Power Supply Cord

The Plasma Display is designed to operate on 120 V AC, 50/60 Hz.

Do not use any power supply cord other than that provided with this unit.

• Doing so may cause fire or electric shocks.

Securely insert the power cord plug as far as it will go.

If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.

Do not handle the power cord plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable.

Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center.

If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma Display, unplug the power cord immediately.

Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Have the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are strongly discouraged due to its high voltage dangerous nature.

If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately.

A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

Do not allow any detergent to come into direct contact with the surface of the Plasma Display. If water droplets get inside the unit, operating problems may result.

Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

7

Page 7
Image 7
Panasonic TH-5065PF10UK Safety Precautions / Maintenance, Setup, AC Power Supply Cord, If problems occur during use

TH-5065PF10UK specifications

The Panasonic TH-5065PF10UK is a leading-edge plasma television that combines advanced technology with a sleek design, delivering an immersive viewing experience. This 50-inch model is part of Panasonic’s prestigious VIERA series, known for its stunning picture quality and reliable performance.

One of the standout features of the TH-5065PF10UK is its Full HD resolution. With a resolution of 1920 x 1080 pixels, this television offers a crisp and vibrant image. The plasma technology enhances color reproduction, resulting in deeper blacks and brighter whites. In addition, the television employs a 600Hz sub-field drive technology that significantly reduces motion blur, making it ideal for fast-paced action scenes in movies and sports.

The TH-5065PF10UK also integrates Panasonic’s advanced Infinite Black technology, which minimizes reflections and improves contrast in bright environments. This feature ensures that viewers can enjoy clear images regardless of the ambient light conditions, making it a versatile option for various room setups.

Sound quality is another key aspect of this model, as it incorporates a powerful sound system with built-in speakers that enhance the viewing experience. The VIERA Link feature allows for easy connectivity with other VIERA-compatible devices, enabling seamless control and integration. Users can take advantage of HDMI ports to connect gaming consoles, Blu-ray players, and more, ensuring a comprehensive entertainment system.

For those who appreciate advanced display settings, the TH-5065PF10UK offers various picture modes, allowing users to customize their viewing preferences. These modes include settings for cinema, sports, and personal tuning, providing flexibility depending on the type of content being watched.

Connectivity options further enhance the usability of the television. With multiple HDMI and USB inputs, users can easily connect external devices and enjoy multimedia content. The built-in media player supports a range of audio and video formats, allowing for effortless playback directly from USB drives.

In conclusion, the Panasonic TH-5065PF10UK is a remarkable television that combines superb picture and sound quality with user-friendly features. The combination of advanced plasma technology, customizable settings, and extensive connectivity options makes it an excellent choice for entertainment enthusiasts seeking a premium viewing experience. With its impressive specifications and design, this television stands out in the competitive market of home entertainment systems.