THE MAIN UNIT
The main unit gives you all the readings and controls. It should be placed indoors.
The main unit is powered up by the 12V AC adapter.
GB
SECTION 3 OPERATION
THE MAIN UNIT
To install it,
1.Position the main unit and other units within effective range (109 yards).
2.Insert four UM3 or
3.Mount the main unit safely in place. Or use its table stand to place it on a flat surface.
4.Connect the AC power adapter to the main unit and a wall socket.
5. Press the [RESET] button on the main unit to initiate operation.
The main unit will start searching for signals for about four minutes. Upon successful reception, the readings will be displayed. The main unit will update the readings at regular intervals.
Note: That if the main unit is operating solely on battery power, the EL backlight and RS232 connection will be disabled.
LOW-BATTERY WARNING
There are
gauge,
Note: The readings collected from the
3
A.WEATHER FORECAST AND BAROMETRIC READING WINDOW
B.INDOOR TEMPERATURE WINDOW
C.INDOOR HUMIDITY WINDOW
D.OUTDOOR/CHANNEL TEMPERATURE WINDOW
E.OUTDOOR/CHANNEL HUMIDITY WINDOW
F.RAINFALL WINDOW
G.CALENDAR CLOCK AND DAILY ALARM WINDOW
H.WIND SPEED AND DIRECTION WINDOW
I.CHANNEL BUTTON
J.MEMORY BUTTON
K.ALARM BUTTON
L.SET BUTTON
M.UNIT BUTTON
N.ALARM ON/OFF BUTTON
O.[U] BUTTON
P.[V] BUTTON
Q.[ RESET] BUTTON
R.RS232 SERIAL PORT
S.DC 12V JACK
3 | 08/10/2001, 12:20 PM |