Contents
Main
1 Location of controls
N13134
2 Installing your Oricom AM880
2.1 Installing the optional backup battery (not included)
2.2 Connecting the telephone line
2.3 Connecting mains (AC) power adaptor CAUTION
3 Setting up your AM880
3.1 Turning the AM880 ON and OFF
3.2 Recording outgoing messages (OGM)
Hello, please leave a message after the tone
No one is available to take your call
3.3 Setting the number of rings
4 Answering system operation
To turn off the announce-only feature,
To select announce-only mode,
4.1 General operation
4.2 Using the announce-only feature
4.3 Recording a personal memo
4.4 Playing messages
4.5 Adjust the speaker volume
4.6 Deleting messages
To delete an incoming message, memo, or two-way phone conversation (after listening to it),
5 Caller ID operation
5.1 Select country for AUS/NZ CID operation
5.2 Receiving calls
If only the callers phone number is received,
If the name and number are not available,
If the name and number are unlisted,
If an incorrect, invalid or incomplete signal is received,
6 Remote operation
Page
6.1 To Retrieve Messages when Recording Memory is Full
Notes for operation in New Zealand
Customers using another companys toll service
Temperature and ambient conditions
Cleaning and care
Troubleshooting
Warranty information
Technical support
Australia
Customer support
New Zealand
Customer Support