INSTALLATION
POWER SUPPLY
IMPORTANT!
The mains power adaptor must be installed near the equipment and must be easily accessible. Power must be turned on at all times for the phone to work
1.Connect the output plug of the mains adaptor to the adaptor socket on the back of the base unit and the mains adaptor to the wall mains supply.
2.Connect the telephone lead to the phone cord socket on the back of the base unit and to the wall phone socket.
FITTING BATTERIES
IMPORTANT: Only use the rechargeable batteries provided with this phone.
1.Place your handset with the keypad facing downwards.
2.Remove the battery compartment cover by pushing on the indent and sliding it in your direction.
3.Insert the two batteries (AAA) into the battery compartment, observing the correct polarity.
4.Slide the battery compartment cover gently back into place, it will click when it is in the correct position.
IMPORTANT!
PLACE THE HANDSET IN THE BASE UNIT AND LEAVE FOR 15 HOURS TO CHARGE THE BATTERIES FULLY BEFORE FIRST USE.
RECHARGING YOUR CORDLESS PHONE
When your handset battery becomes low the Low Battery symbol 
appears on the display. To recharge it, just replace the handset on the base unit.
Tip! It is good practice to put the handset on the base unit to charge when it is not in use or every evening to ensure the handset is always fully charged
REPLACING BATTERIES
CAUTION
THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use
- 6 -
