PRE-DAILLING
∙In standby mode enter the phone number you wish to dial.
∙To enter a pause, press the 
button and a dash
∙If you make a mistake, press DEL to erase one digit at a time. Or you can press and hold the DEL button to clear the entire number and return the phone to standby.
∙Press 
to dial out the number.
∙To end the call, press the 
button again, or replace the handset back in the base.
Note:If you have connected this phone to an office phone system (PBX) you may need to enter a pause for a few seconds between dialling the line access code and the actual phone number.
To pause, press the 
button and a dash “ - “will appear in the display.
LAST NUMBER REDIAL
You can review and call back the last 3 numbers you have dialled as your cordless stores them in the redial memory.
∙In the standby mode press the 
button to scroll through the last 3 numbers you dialled.
∙Select the number you want to redial and press 
, to dial the number.
CALL DURATION TIIMER
When you make or answer a call the display shows the call duration in time minutes and seconds.
ADJUSTING THE EARPIECE VOLUME
During a call, to adjust the volume in the handset’s earpiece or speakerphone press
the volume button repeatedly 
.
The display shows the current volume level: the more “0’s” the highest the volume (“0” to “00000”).
TO PAGE THE HANDSET
This function is useful if you can’t find your handset.
∙On the base unit press and release the 
button. The handset rings with a special tone.
∙To stop the handset ringing, on the handset press any button or numbered key.
-8 -
