BASIC OPERATION
Introduction
When the phone is in standby mode, the LCD displays the handset name. The battery icon reflects the current battery level and the signal icon indicates the handset is linked to the base.
TO ANSWER A CALL
∙When you receive a call, both handset and base will ring, the 
symbol appears on the display, and both the red led on the handset locator button and the big red led on the phone base will start flashing. If your cordless is directly connected to the telephone line (not via PABX) and the Caller Details Service has been activated by your server, the caller’s telephone number (if available) appears on the display.
∙Press the 
button to answer the call, the symbol 
will come up steadily on the display and the base red led with flash.
∙To end a call, press again the 
button, or alternatively replace the handset back in the base. The display symbol and the base red led disappear.
MAKING A CALL
∙Press 
button.
∙The symbol 
appears steadily on the display and the base red led starts flashing.
∙Check that the dial tone is present then key in the number.
∙The dialled number appears on the display.
∙To end the call, press again the 
button or alternatively replace the handset back in the base.
USING THE HANDS-FREE SPEAKERPHONE
The
To activate the speakerphone, press the X button when the handset is in standby mode or after having pressed the 
button to make or pick up a call.
The speakerphone is active if you can hear the callers voice coming from the speaker
and can see the X and the 
symbols on the display 
(hold repeatedly the Volume button to adjust the speaker volume). To switch back to normal mode from a speakerphone call, briefly press the X button.
- 7 -
