Page 4 of 11
INTENDED USE
This telephone has been developed for use via a USB port on a PC.
Power failure
The telephone cannot be used to make calls in the event of a power failure.
Always have a standard corded telephone close at hand, which can be used
without connection to a PC and Internet, for emergencies.
Warnings
Do not use your telephone during an electrical thunderstorm as it is possible
to get an electric shock. Refer to information contained in Telstra White
pages directory.
The earpiece of the handset may attract small metal objects such as staples
and pins. Care should be taken when placing the handset near these items.
Installation location
Place the telephone on a level, non-slip surface.
Prevent excessive exposure to smoke, dust, vibration, chemicals, liquid,
humidity, heat or direct sunlight.
Cleaning and Care
Clean the housing surfaces with a dry, soft, fluff-free cloth. Never use cleaning
agents or aggressive solvents. Apart from occasionally cleaning the case no
other care is necessary.
STARTING UP
Connecting the IP7 to the PC
Note: Ensure your Internet connection is now active.
Connect the USB plug on the IP7 telephone to a USB port on the PC.
When the IP7 is connected to the PC for the first time, Windows automatically
detects the new hardware and installs it.
Do not unplug your phone or install any other software until Windows has finished
the detection. This process could take some time.
Note: If this is not done automatically, please carry out the following steps.