ADDITIONAL FEATURES

Resetting

You can reset the display, sounds, and other settings of your phone. Refer to the section Default settings.

1.Press the MENU key.

2.Select ADVANCED SET and press the OK key.

3.Select RESET and press the OK key.

4.Enter the PIN (The default pin code is 0000).

5.Press the OK to confirm.

11Additional features

Keypad lock

Keypad can be locked to prevent accidental key press. When the keypad is locked, you can still answer an incoming call by pressing the TALK key. During the call, the keypad is active. When the call is ended, the keypad will be locked again.

LOCKING AND UNLOCKING THE KEYPAD

1.Press and hold KEY LOCK during standby. When locked, LOCKED appears on the display.

2.Press and hold KEY LOCK again to unlock the keypad.

NOTE: When a call comes in, your keypad becomes active. When you end the call, your keypad will be locked again.

Shortcut for turning handset ringer on/off

You can use this shortcut to turn on/off the handset ringer.

1.Press and hold the RINGER OFF key.

Note: appears to indicate the ringer is turned off. The handset will not emit any sound for any incoming call.

Message waiting indication

If you have subscribed to the voicemail service from your local service provider and/or from SKYPE, turns on when you have a new message in either of your mailboxes. After you’ve listened to all the new messages, will turn off.

Finding a handset

You can locate the handsets by using this feature.

1.Note:PressAllhandsetshold ther gisteredPAGE keyto theon thebasebasewill.produce the paging tone for 30 seconds and the screen displays PAGING. If an external call comes in, all the handsets will stop paging, and play the external call melody.

Stop the paging

You can stop the paging by pressing any key on each handset or pressing the PAGING key on the base again.

Not ringing?

A handset will not play the paging melody if it is powered off or in mode other than standby mode; however, all the other handsets will still ring.

Page 27 of 31

Page 27
Image 27
Oricom IP800 manual Not ringing?