Usingsing thethe ttwinin chargingcharging kitkit
To use the charging kit, place the charging pod on any flat surface.
1.With the radio turned off, remove the battery cover.
2.Insert only the
3.Replace the battery cover.
4.Plug one end of the AC power adaptor into the charging pod and then the AC adaptor into the power socket.
5.Slide the radios into the charging pod ensuring the charging contacts line up. The red lights on the charge pod glow when radios are properly inserted.
6.The batteries will be fully charged within 14 hours.
Note: When moving between hot/cold environments do not charge the battery until the battery temperature acclimates (usually about 20 minutes).
2.Select sensitivity level 1, 2 or 3 by using 
or 
. Choose - 1- If you speak loudly, or are in a noisy environment.
2- Suitable for most applications.
3- If you speak softly, or are in a quiet environment.
Note: When you connect a VOX headset, the radio will automatically be set to the last chosen VOX sensitivity level. If IVOX is active, the radio will automatically select IVOX level.
Monitorit r ffunctionti
This feature allows you to listen for weak signals on the current channel.
1.Pressing and holding 
allows you to monitor your channel for activity.
2.Adjust volume up or down by using 
or 
.
Note: It is good radio etiquette to monitor the channel for activity before you transmit, to ensure that you do not interrupt other users already on the channel.
7 | 16 |
