You can specify a different code for each channel.
1.To set a channel and CTCSS code combination, press 
and then press 
or 
to select the channel.
2.Press 
again and then press 
or 
to select a CTCSS code.
3.You can not select interference eliminator codes on channel 5 or channel 35. On this
channel press 
. The radio shall skip the codes setting.
4.Press 
to exit the menu and to save the channel and code combination.
To set another channel and code combination, repeat these steps.
Scan advance
If scan stops on a channel that you don’t want to listen to, briefly press
or 
to resume scanning for the next active channel.
Nuisance delete
If scan continuously stops on an undesired channel, press and hold 
or 
for at least 3 seconds, then release. This will temporarily remove the undesired channel from the scan list.
To restore the channel to the scan list, turn the radio off and then on. You cannot remove your home channel from the scan list (your home channel is the channel your radio was set to when you activated scan).
Monitor
Pressing and holding 
allows you to monitor your channel for activity.
Keypad lock |
|
|
|
|
|
|
|
|
|
| ||
The keypad lock disables the |
|
| , |
|
|
| and |
| buttons. It also disables the scan | |||
|
|
|
|
| ||||||||
function, but allows you to use the |
| button to monitor the channel. | ||||||||||
| ||||||||||||
Press and hold the |
|
| button for three seconds to lock or unlock the keypad. When | |||||||||
| ||||||||||||
the radio is locked, the | icon will show in the display. | |||||||||||
Call tone
A call tone alerts others in your group that you want to talk. Your radio has 10 call tones to choose from.
Selecting a call tone
1.With the radio on, press 
repeatedly, until 
appears in the display.
2.The current call tone setting will begin to flash.
3.Press 
or 
to change and hear call tones while the setting number is flashing.
4.Press 
to set the new call tone.
Note: The Australian UHF CB Radio Standard restricts tone calling to 3 seconds. This
unit will only transmit for a maximum 3 seconds in any 60 seconds. Note: The radio does not support the call tone feature on channels 5 or 35.
11 | 12 |
