Operation
Duplex operation via Repeaters
This feature allows to use local repeater stations that are designed to automatically
Repeaters stations are privately operated radio systems installed throughout Australia.
You can see a list of repeater sites by following this link to our website (note this list is always being updated) http://www.oricom.com.au/support/repeater or visit
For example, if you wish to access a repeater station in your area which operates on channel 2 you only need to set the Duplex access on this Channel.
So, if you are in the range of a local repeater which transmits on channel 2, after setting your radio to allow access of the repeater on that channel, you will select channel 2 as normal, but during transmit operation your radio will automatically transmit to the repeater on channel 32.
Turning on/off Duplex on channels
a.Select the required channel to suit the repeater station you wish to access (Channels 1 – 8 only)
b.Press the Menu button twice, “RPT” icon will display
c.Press the UP or DOWN button to set the Duplex function to On or Off.
d.Press the PTT button to confirm your setting.
e.The RPT icon will display to indicate that Duplex is set on that channel.
Receive Channel | 1 | 2 | 3 | 4 | 5* | 6 | 7 | 8 |
Transmit channel | 31 | 32 | 33 | 34 | 35* | 36 | 37 | 38 |
* Channel 5 is emergency channel only
2 | |
Channel | 32 |
Channel | |
Repeater Station
Channel
Channel 32
2
13
