Pre Dialing a Call
1.Dial the number you wish to call the telephone will speak out the numbers as you dial them (with voice option ON). To correct a number press the DELETE button for each incorrect digit.
2.Pick up the handset, press CALL BACK or press the SPEAKER button.
6.2 Receiving a Call
When you receive a call, the telephone rings, the Ringer LED flashes, and the display shows the CALL# and the caller telephone number (with caller id service activated). The phone will say the name of the caller if the number matches a name recorded in the phone book, if not, it will say the numbers of the caller.
This feature allows you to decide to pick up the phone or not depending on who is calling.
If you want to talk to the caller:
1.Pick up the handset or press SPEAKER button to answer the call.
2.At the end of the call, return the handset to the cradle or press SPEAKER button again.
Answering a call telephone call with the remote pendant
If you are within a few meters of the TP170WP you can answer an incoming call by pressing the red button on the remote pendant, the telephone will answer the call and activate the speakerphone so you can speak to the caller without picking up the handset. By pressing the red button of the pendant a second time you will deactivate the speakerphone and return to standby mode.
This feature is particularly useful if you are relaxing and do not wish to get up to answer the telephone.
6.3 Speaker Volume Control
You can adjust the speaker volume level that suits you by sliding the VOLUME switch.
6.4 Last number Redial
To redial the last number called:
1.Lift the handset or press SPEAKER button.
2.Press the REDIAL button.
3.The last number you dialed (manually) will then be can be redialled.
10
