9. Caller ID
Important: To use Caller ID functions the CLIP symbol must be on. If the CLIP symbol is not visible on the display, press the CID button once.
9.1 Receiving a Call (Can be stored up to 64 calls)
•If an incorrect, invalid or incomplete Caller ID signal is received, the display shows
•If only the caller's phone number is received, the display shows the caller's phone number with the time and date it was received. The NEW symbol turns on and NEW CALL LED blinks.
Notes:
1.CALL#01 means this data is stored in Caller ID memory location #01.
2.The calling time and date are immediately recorded from the
•If the callers number is not available due to the caller’s restriction, the display shows
•If the callers number is not available, the display will show
•If a overseas call is received, the display will show
Notes:
1.If the Caller ID memory is full, the oldest data will be removed on a first-
2.If the Caller ID information received duplicates another call in memory, the time/date will be updated and the “REPEAT” symbol will be lit.
3.If no key is pressed within 20 seconds, the display will display the total call counter, new call counter, current time and date.
9.2 View the Caller ID Memory
Press 
to review more recent calls. The CALL# will increase.
After you view the most recent data in memory, the display will show END OF LIST.
Press 
to review older calls. The CALL# will decrease.
After you view the oldest data in memory, the display will show END OF LIST.
If the data in memory is being reviewed for the first time, the NEW symbol will be lit. The NEW CALL LED will off if you review the data.
If no key is pressed within 20 seconds, the display will display the total call
counter, new call counter, current time and date. 18
