Oricom TP170WP Receiver Volume Control, Hearing Aid Compatibility, Receiver Tone Volume Control

4.5 Receiver Volume Control

The receiver volume control enables you to adjust the receiver volume on the handset. Rotate the button on the base to select a comfortable listening level (1-9), the red LED will turn on.

WARNING

Setting the receiver volume to maximum may, under some situations cause ear damage.We suggest returning the volume control to the “0” (OFF) position after each call.

4.6 Hearing Aid Compatibility

This unit is compatible with most inductively coupled hearing aids on the market. However due to the wide range of hearing aids available we cannot guarantee that the TP170WP will function error free with every model.

4.7 Receiver Tone Volume Control

You can use the TONE slide switch to adjust high frequency sounds. Words are clearer and easier to understand. Note:The tone adjustment function will not work if the receiver volume is set to the minimum level.

4.8 Selecting the ringer melody

1.Press and release the MENU button until RINGER MELODY is shown.

2.Press the OK button, the display shows RINGER MELODY 1.

3.Select the desired RINGER MELODY 1, 2 or 3 using or and confirm with OK button.

4.Press CID to exit the set-up mode.

4.9 Ringer Volume Control

The ringer sound level can be adjusted by sliding the RINGER switch. Select high (HI), mid (MID) or low (LO) level.

The bright Red light (LED) on the base will flash with all incoming calls.

5. REMOTE PENDANT

The telephone comes with one waterproof emergency pendant which is already paired with the unit.

Please contact your local re-seller to purchase additional emergency pendants. These can be used by another person in the house or to have a spare pendant in more than one room (like bathroom and bedroom).

The following information is for pairing additional pendants only or if you accidently have deleted the pendant from the “pairing menu”

8