-Operation- 1 General Information Warnings
• The telephone is designed for indoor use only. Do not install the telephone in areas where
there is the risk of an explosion, excessive exposure to smoke, dust, vibrations, chemicals,
moisture and heat.
• Do not install in damp locations such as a bathroom or laundry, do not expose the unit to
direct sunlight.
• Do not use your telephone during an electrical thunderstorm as it is possible to get an
electric shock. Refer to information contained in Telstra White pages directory.
• The earpiece of the handset may attract small metal objects such as staples and pins.
Care should be taken when placing the handset near these items.
Quick connection information
Before installing or changing the battery, make sure that the telephone is not
connected to the telephone network.
First install the battery supplied, connect the curly cord to the phone and the
handset. Connect the line cord to the bottom of the phone and then to the wall
socket using the plug supplied. Lift the handset and check for dial tone.
LOCATION
Do not position the unit in the immediate vicinity of other electronic equipment
such as microwave or hi-fi units as this can lead to mutual interference. The
location has a deciding influence on the trouble-free operation of the telephone.
Stand the telephone on a flat, non-slip surface. The telephone feet do not
normally leave any marks on the surface. However, on account of the multitude
of varnishes and surface finishes used, surface marks caused by the feet of the
unit cannot be ruled out. Do not use the unit in areas where there is the risk of an
explosion. Excessive exposure to smoke, dust, vibrations, chemicals, moisture,
heat or the direct rays of the sun must be avoided.
DISPOSAL
If the useful life of the complete equipment has expired, please dispose of these
carefully in accordance with the statutory requirements and in a manner friendly
to the environment.
Temperature and ambient conditions
The telephone is designed for indoor use (temperature range of -10 °C to 50 °C).
Do not install the telephone in areas where there is the risk of an explosion,
excessive exposure to smoke, dust, vibrations, chemicals, moisture, and heat. The
unit must not be installed in damp locations such as a bathroom or laundry, do
not expose the unit to direct sunlight.