-Operation-
3.11 Setting the time/date
If you want to reset the time or change a time already entered, proceed as
follows:
1. Press the DIAL/MENU button for 3 seconds. The display shows
“OPTIONS cd”.
2. Press the c buttons until the display shows “TIME/DATE”.
3. Press the DIAL/MENU button. The hour display will flash.
4. Press the d and c button until the correct number of hour appears in the
display.
5. Press the DIAL/ MENU button. The minutes display will flash.
6. Press the d and c button until the correct number of minute appears in
the display.
7. Press the DIAL/ MENU button. The month display will flash.
8. Press the d and c button until the correct number of month appears in
the display.
9.
10. Press the DIAL/ MENU button. The date display will flash.
11. Press the d and c button until the correct number of date appears in the
display.
12. Press the DIAL/ MENU button. The setting is completed
13. Press the RECALL button to exit.
Note: If you have subscribed to your service providers Caller ID service. The
time and date is updated using the caller ID information from your service
provider.
3.12 Call Duration Display
The call duration is shown in the display in minutes and seconds during a call.
The indication starts after the number has been dialled. The call duration is
displayed for a few seconds after the call has ended.
3.13 Adjustable Ringer Volume
You can use the slide switch underneath the telephone to select the settings
(loud) or (soft) to adapt the ringer volume to your requirements. Should
you not want to be disturbed, select (off).