![Transmitting and Receiving](/images/new-backgrounds/12015/1201525x1.webp)
Operation
SETTING THE DCS ADVANCED DIGITAL CODE.
Each channel also has 83 digital codes to let you set a group of users for more secured private communication.
a. Press the MENU button 3 times. DCS code is blinking on the LCD screen.
b. Press the UP or DOWN button to select the desired DCS code.
c. Press the PTT button to confirm the DCS channel setting.
Transmitting and Receiving
The UHF2100 transmission is “one
The UHF2100 is an
IMPORTANT: Before transmitting on a UHF channel listen to ensure it is not already in use.
Transmitting (sending a speech)
The unit is continuously in the Receive mode when the unit is turned ON and not transmitting. When a signal is received on the current channel, “RX” icon will be displayed on the LCD screen and the receiver LED will light up.
a. Press and hold the PTT (push to talk) button to transmit your voice. “TX” icon will be displayed on the LCD Screen.
b. Hold the unit in a vertical position with the MIC (Microphone) 5 cm away from the mouth. While holding the PTT button, speak into the MIC (microphone) in a normal tone of voice.
c. Release the PTT button when you have finished transmitting.
13