Oricom UHF2100 manual Operation, Setting the Dual Watch Mode

Operation

a. Press the MENU button 11 times, the “ON” icon is flashing on the LCD Screen.

b. Press the UP or DOWN button to select Key tone On/Off. c. Press the PTT button to confirm your setting.

Setting the Dual Watch Mode

Your radio is capable of monitoring two channels, the current and another (dual watch) channel. If the unit detects a signal on either channel, it will stop and receive the signal.

a. Press the MENU button 12 times, “DCM” icon will be displayed while “OF ” flashes on the LCD Screen.

b. Press the UP or DOWN button to select the Dual Watch channel (1-40, except the current channel).

c. Continue pressing the MENU button to change the CTCSS code.

d. Press the UP or DOWN button to select the desired CTCSS code (1-38)

e. Continue pressing the MENU button to change the DCS code.

f. Press the UP or DOWN button to select the desired DCS code (1-83)

g. Press the PTT button to confirm your setting.

Repeater function

Your radio has a Repeater Access function to allow use of local Repeater stations (if available in your area). Repeaters are shared radio system installed by interested parties (clubs, local business etc.) that pick transmissions on specific channels and re-transmit (or repeat) the received signal to another channel.

The Repeater Access function can be set (from channel 1 to 8) used by local repeater stations. For example, if there are 3 repeater stations in your area (say, channel 1, 3 and 5) you only need to set

17