change batteries, you must unthread the top of the LaserMate Deluxe’s black aluminum case (Figure 12). This will expose the laser housing. Be careful not to lose the spring that goes between the top of the case and the laser housing.

Do not attempt to remove the laser housing from the LaserMate Deluxe unit, or your collimator will need to be re- aligned at the factory. Also, removing the laser housing will void your factory warranty. It is necessary, however, to remove the top of the laser housing to access the battery compartment.

Unthread the top of the laser housing. The battery compart- ment will now be exposed. If you have difficulty unthreading the top of the laser housing, slip a straightened paper clip or small rod through the hole in the top of the housing for extra leverage.

Remove the spent batteries and install two fresh batteries. The batteries should be inserted so that the positive (+) end of the batteries face the open end of the battery compart- ment. After installing new batteries, replace the top of the laser housing, the spring, and the top of the LaserMate Deluxe’s case. Battery life is approximately three hours, so remember to keep the LaserMate Deluxe turned off when not in use to maximize battery life. Orion has sets of LR-44 bat- teries available, so call Orion Customer Service at 1-800-447-1001 or visit our website at www.telescope.com to order a new set.

Specifications

Laser power: less than 5mW

Laser wavelength: 650nm

Alignment: ± 3 arcmin

Focuser size: 1.25", fits 2" with optional 2"-to-1.25" adapter

Case: aluminum, black anodized

Dimensions: 5.875" long x 1.6" diameter

Weight: 9.8 oz

Batteries: LR-44, quantity 2

Battery life: approximately 3 hours

Certification: meets all FDA regulations applicable

at the time of manufacture

Appendix: Centering the Secondary Mirror Under the Focuser

In order to use the LaserMate Deluxe to center the secondary mirror underneath the focuser, you must mark the center of the secondary mirror. Do this by first removing the secondary mirror from the telescope and making a paper template the same way you made a template for the primary mirror. Use the template and one of the remaining collimation targets to mark the secondary mirror’s center. Reinstall the secondary mirror once its center has been marked.

Place the LaserMate Deluxe into the telescope’s focuser and turn it on. Now, peer into the optical tube and look at the pri- mary mirror. Notice the reflection of the secondary mirror on the primary mirror; you will see a bright red spot on the sec- ondary mirror where the laser beam is reflecting off it. The red spot should be exactly at the center of the collimation target on the secondary mirror. If it is not, you will need to make adjustments to the secondary mirror’s position until it is. For adjustments perpendicular to the optical axis, lengthen and shorten the spider vanes. For adjustments parallel to the opti- cal axis, loosen or tighten the screw centered in the spider’s central hub. You may also need to adjust the rotation of the secondary mirror relative to the focuser.

This product complies with 21 CFR 1040.10 and 1040.11

One-Year Limited Warranty

The Orion LaserMate Collimator Deluxe is warranted against defects in materials or workmanship for a period of one year from the date of purchase. This warranty is for the benefit of the original retail purchaser only. During this warranty period Orion Telescopes

&Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to be defective, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way, Watsonville, CA 95076. If the product is not registered, proof of purchase (such as a copy of the original invoice) is required.

This warranty does not apply if, in Orion’s judgement, the instrument has been abused, mishandled, or modified, nor does it apply to normal wear and tear. In addition, the war- ranty is also void if the laser housing is removed from the unit, the product’s label is removed, or any other attempt is made to change the laser’s alignment. Factory realign- ment is a service not covered by this warranty. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For further war- ranty information, contact: Customer Service Department, Orion Telescopes & Binoculars, P.O. Box 1815, Santa Cruz, CA 95061; (800) 676 1343.

Orion Telescopes & Binoculars

Post Office Box 1815, Santa Cruz, CA 95061

Customer Support Help Line (800) 676-1343 • Day or Evening

Page 3 Page 4
Page 4
Image 4
Orion #5690, Orion LaserMate Deluxe Specifications, Appendix Centering the Secondary Mirror Under the Focuser
Page 3 Page 4

#5690, Orion LaserMate Deluxe specifications

The Orion LaserMate Deluxe, model number 5690, stands out as a cutting-edge tool in the world of astronomy. Designed for both amateur stargazers and seasoned astronomers, this laser collimator is a must-have for anyone serious about getting the most out of their telescope. With its innovative features and user-friendly design, the LaserMate Deluxe ensures that you can achieve precise optical alignment with ease.

One of the main features of the Orion LaserMate Deluxe is its advanced laser technology. Utilizing a high-quality, adjustable laser beam, it enables users to quickly and accurately align their telescope's optics. The collimator’s robust construction ensures reliability and durability, allowing it to withstand the rigors of outdoor use. Its compact size makes it portable and easy to carry to different observation sites.

The LaserMate Deluxe is equipped with a dual-beam design that enhances usability. This design allows astronomers to quickly assess both the primary and secondary mirrors' alignment, making the collimation process faster and more efficient. Additionally, the unit features a built-in circular bubble level, ensuring that users can achieve optimal positioning before starting the collimation procedure.

Another notable characteristic of the Orion LaserMate Deluxe is its wide compatibility with a variety of telescope types. Whether you're using a Newtonian reflector or a Dobsonian telescope, this device can easily fit into standard 1.25-inch or 2-inch focusers, making it a versatile option for virtually any setup.

In terms of ease of use, the LaserMate Deluxe incorporates simple instructions and a user-friendly interface, allowing even novice astronomers to achieve precise alignment with minimal effort. Its battery-operated functionality ensures that it’s ready to use at a moment’s notice, and the long-lasting battery life means it will not let you down during extended observation sessions.

Furthermore, the Orion LaserMate Deluxe boasts a sleek design that emphasizes portability and ease of storage. Its lightweight construction means you won't feel weighed down when bringing it along on your astronomical adventures.

In summary, the Orion LaserMate Deluxe (#5690) is a remarkable laser collimator that simplifies the telescope alignment process for enthusiasts of all experience levels. With its advanced dual-beam technology, compatibility with various telescope types, and ease of use, this innovative tool enhances the overall stargazing experience, making it an essential accessory for anyone looking to explore the cosmos with precision and clarity. Whether you’re a beginner or an experienced astronomer, having the LaserMate Deluxe in your toolkit will undeniably elevate your celestial observations.
Top Page Image Contents