Orion HP-2300, HP-2400, HP-2600, HP-4600

Tri-Mode Six Channel Configuration

●Lowest recommended impedance is 2Wstereo and 4Wbridged mono.

●Front and rear outputs must be set for full range operation.

●Passive crossovers must be used on all components and frequencies must not overlap.

WARNING! Failure to observe these requirements may result in damage to the amplifier.

SPEAKER

1CH

2CH

1CH

2CH

BRIDGE

SPEAKER

3CH

4CH

3CH

4CH

BRIDGE

Contents

Main CONTENTS INTRODUCTION Whats in the Box 2 PRACTICE SAFE SOUND RECORD YOUR SERIAL NUMBER AND DATE END PANEL LAYOUTS HP-2300, HP-2400, HP-2600 Controls HP-2300, HP-2400, HP-2600 Connections HP4600 Controls 4 HP4600 Connections 6 CEA SPECIFICATIONS 8 SPECIFICATIONS SPECIFICATIONSCONTINUED 10 AMPLIFIER SETTINGS Signal Input and Output Configurations Input Gain Line Output Configurations Internal Crossover Configurations High-Pass Crossover Input Gain Adjusting Intelli-Bass 12 Infinite Baffle Example High-Pass Set at 30Hz Sealed Example High-Pass Set at 20Hz Page 14 AMPLIFIER WIRING Power Connections High Level Input Harness Page Page Page 18 Three Channel Stereo/Bridged Configuration Page 20 AMPLIFIER INSTALLATION Choosing Mounting Locations Passenger Compartment Trunk Compartment General Precautions and Installation Tips Tools of the Trade Step By Step Installation 22 SET UP AND TROUBLESHOOTING Testing the System Adjusting the Sound of the System 24 Troubleshooting Tips