Orion Car Audio 7005 manual End Panel Layout

END PANEL LAYOUT

1.Power LED - indicates that the amplifier is on.

2.Front Low-Pass Crossover Switch - activates 2nd order low pass crossover.

3.Front Low-Pass Frequency Control - adjusts the frequency of the low-pass crossover.

4.Front Gain Control - continuously adjusts from 200mV to 5V for full power output.

5.Front High-Pass Crossover Switch - activates 2nd order high pass crossover.

6.Front High-Pass Frequency Control - adjusts the frequency of the high-pass crossover.

7.Front RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

8.Rear RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

9.Subwoofer RCA inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

10.4CH / 2 CH Switch - configures the amplifier for one or two sets of inputs.

11.Rear Gain Control - continuously adjusts from 200mV to 5V for full power output.

12.Copy/Master Switch - Determines the output of the RCA outputs.

13.Rear Low-Pass Crossover Switch - activates 2nd order low pass crossover.

14.Rear Low-Pass Frequency Control - adjusts the frequency of the low-pass crossover.

15.Rear High-Pass Crossover Switch - activates 2nd order high pass crossover.

16.Rear High-Pass Frequency Control - adjusts the frequency of the high-pass crossover

17.Subwoofer IN / EXT Switch - configures the subwoofer channel to use external RCA's or an internal summed input.

©2003 Directed Electronics, Inc. 5