FEATURES
15 | 1 | 2 |
| 13 |
| 3 |
|
|
| |
| 14 |
| 4 |
|
|
| |
| 12 |
| 5 |
|
| 6 | |
|
|
| 7 |
| 11 |
|
|
| 10 | 9 | 8 |
1 | Polypropylene dust cap - moisture and UV resistant. |
| |
2 | Oversized NBR | ||
| controlled long excursion. |
|
|
3 | Vented paper cone - moisture and UV resistant. |
| |
4 | Custom stamped steel frame. |
| |
5 | Vented Kapton voice coil former (10” & 12" uses 1.5" voice coil | ||
| former, 15” use a 2" voice coil former). |
| |
6 | 8mm steel front plate. |
|
|
7 | Large 2 stack ceramic magnets. |
| |
8 | 8mm steel back plate/pole piece T yoke assembly. |
| |
9 | .75" vent. Part of the enhanced voice coil cooling system (forced | ||
| convection). |
|
|
10 | PVC magnet protector. |
|
|
11 | High temperature Copper 4 ohm voice coil. |
| |
12 | Venting in voice coil former. Part of the enhanced voice coil cooling | ||
| system (forced convection). |
|
|
13 | Interlaced Conex spider with stitched and looped tinsel leads | ||
| attached. |
|
|
14 | Push Terminals. |
|
|
15 | Reversible PVC mounting gasket. |
| |
© 2007 directed | 3 |
