Remote Gain Operation

NOTE: Do not use the Remote Gain control when you have an expanded system installed (see Line Ouput Configurations). The Slave amplifier(s) gain will not be controlled.

The remote gain port provides easy remote access to the internal gain structure of the HCCA power amplifier. The HP-RB1 plugs into the amplifier via the 1/8" mini jack plug. The HP-RB1 can be installed in the front of the vehicle to control the amplifier gain level. The HP-RB1 can be used as a bass level control when used on an amplifier dedicated to subwoofers.

AMPLIFIER WIRING

Power Connections for the HCCA-D1200, and HCCA-D2400

●Orion HCCA-D1200 Fuse Size: 2 x 30 AMP ATC.

●Orion HCCA-D2400 Fuse Size: 3 x 40 AMP ATC.

●Power connections accept up to 4 AWG wire.

●4 AWG power and ground wire recommended for optimal performance.

●Connect 12V+ to the battery through fuse holder. This connection provides +12V main power to the amplifier.

●Power wire must be fused no more than 18" from battery.

●Ground amplifier to a good chassis ground as close as possible to the amplifier.

●Connect REM terminal to remote turn-on lead from source unit. This connection provides +12V power to turn-on the amplifier.

●Add extra ground wire between the negative terminal of the battery and the chassis.

Power Connections for the HCCA-D5000

●Orion HCCA-D5000 Fuse Size: inline 250 AMP.

●Power connections accept up to 4 AWG wire.

●Dual 4 AWG power and ground wire required for proper performance.

●Connect 12V+ to the battery through power distribution and fuse holder. This connection provides +12V main power to the amplifier.

●Power wires must be fused no more than 18" from battery.

●Terminate both grounds of the amplifier to a good chassis ground as close as pos- sible to the amplifier.

●Connect REM terminal to remote turn-on lead from source unit. This connection provides +12V power to turn-on the amplifier.

●Add an extra ground wire between the negative terminal of the battery and the chassis. Either dual 4 AWG or single 1/0 AWG is recommended.

NOTE: The addition of a ground wire from the battery to the chassis of the vehicle improves the ability of the battery to supply power to the amplifier. This is recom- mended because the current delivery of the factory electrical system was designed only to accommodate electronics supplied by the auto manufacturer.

WARNING! The Orion HCCA-D5000 has two separate four-gauge power and ground inputs. Both pairs of connections must use 4 AWG power wire for proper operation. Failure to do this may damage the amplifier and is not covered under warranty. The HCCA-D5000 cannot be operated in a bridge or strapped configuration, attempting to do so will damage the amplifier.

© 2005 Directed Electronics, all rights reserved

11

Page 11 Page 13
Page 12
Image 12
Orion Car Audio manual Amplifier Wiring, Remote Gain Operation, Power Connections for the HCCA-D1200, and HCCA-D2400
Page 11 Page 13

HCCA-D5000, HCCA-D2400, HCCA-D1200, HCCA-D1200, HCCA-D2400, HCCA-D5000 specifications

Orion Car Audio has long been a respected name in the car audio industry, known for producing powerful and high-quality amplifiers. Among its standout products are the HCCA-D1200, HCCA-D2400, and HCCA-D5000 amplifiers, each designed to deliver exceptional performance and clarity in audio reproduction.

The Orion HCCA-D1200 is a formidable amplifier that offers a power output of 1,200 watts RMS at 1 ohm. It is tailored for those seeking a robust sound system that prioritizes low-frequency performance. This model features a high-efficiency Class D design, enabling it to transmit clean power with minimal distortion. With adjustable gain control, low-pass and subsonic filters, users can easily tailor the sound to suit their preferences.

Moving up in the lineup, the HCCA-D2400 stands as a powerhouse capable of delivering 2,400 watts RMS at 1 ohm. This amplifier is built with a heavy-duty heat sink and high-quality internal components, ensuring durability and reliability even under heavy loads. The HCCA-D2400 is designed with an advanced PWM MOSFET power supply, enhancing the overall efficiency. Its comprehensive crossover system allows for precise audio tuning, catering to both casual listeners and audiophiles.

For those who demand the ultimate in power, the HCCA-D5000 is a top-tier choice. This beast of an amplifier provides an astounding 5,000 watts RMS at 1 ohm, making it ideal for competitive setups and serious bass enthusiasts. The HCCA-D5000 features an ultra-efficient design that minimizes power loss, paired with a low-level input sensitivity that maximizes compatibility with various signal sources. Its built-in protection circuitry safeguards against overheating and short circuits, adding a layer of reliability.

All three models emphasize Orion’s commitment to high-quality construction and innovative technology. They utilize a unique low-frequency response, ensuring that bass notes are rendered with depth and clarity. Together, the HCCA-D1200, HCCA-D2400, and HCCA-D5000 represent an impressive lineup, catering to clients with varying needs and preferences.

Whether enhancing a daily driver or building a competition-grade sound system, the Orion HCCA series amplifiers provide the power, clarity, and reliability that enthusiasts demand. With their striking performance characteristics and user-friendly features, they embody the essence of what Orion Car Audio stands for in the competitive landscape of car audio equipment.
Top Page Image Contents