APPENDIX—PROGRAMMABLE FEATURES

The following listing are ESP®-2 features that can be programmed or accessed by your installer to customize or troubleshoot your system. Factory default settings are shown in bold.

NOTE: The Bitwriter® must have software version 2.3 or above to access the amplifier fea- tures menu.

NOTE: A setting marked “Reserved” is for future development.

Turn On Delay - 0.75, 1.25, 1.75, 2.25, 2.75, 3.25 seconds. Delays the amplifier turn-on when the head or source unit is turned on. This eliminates any annoying pops or noise during power up from the head or source unit from feeding through to the amplifier.

Service Code Display - OFF, Flash Code on LED, Reserved, Clear Last Fault.

When set to “Off” the service code display will not be displayed on top of the amplifier (see Top Light Options feature below) and the amplifier operates nor- mally.

When set to “Flash Code on LED”, the LED on top of the amplifier will be enabled to flash the diagnostic code (see table below).

The “Clear Last Fault” setting is used by your installer to clear the last fault event detected by the amplifier.

NOTE: When the Clear Last Fault setting is used, execute a “read” cycle from the Bitwriter® prior to attempting further writes. This resynchronizes the Bitwriter®.

ESP®-2 Status Indicator

Mode

Solid Illumination

Normal Operation

 

 

Flashing

Turn On delay or TX learn

 

 

Flashing Slowly

Thermal shutdown

 

 

Flashing Rapidly

Overcurrent

 

 

Slow Flash (50% duty cycle)

Overvoltage

 

 

Slow Flash (mostly off)

Under-voltage

 

 

Off

Amplifier Off

 

 

Flashing

Arm/Valet received

 

 

Flashing Rapidly

Amplifier in Anti-theft/Valet

 

 

Flashing

Amplifier armed

 

 

Input Gain Range (Volts) - Default, 0.15–0.50 V, 0.50–1.00 V, 1.00–3.00 V, 3.00–5.00 V. This feature allows the input gain range to be limited. This feature is useful to prevent the amplifier from being overdriven. The “Default” setting turns the Input Gain Range feature off, the input gain adjustment is settable over the full range of the control.

NOTE: If the Input Gain Adjustment is set to Lock (see below), the Input Gain Range adjustment will not be altered until the Input Gain Adjustment is set to Unlock.

Input Gain Adjustment - Unlock, Lock. When set to “Lock”, the input gain adjustment is disabled. This can be set to lock after the amplifier has been installed and set up to prevent accidental or unwarranted adjustment.

20

© 2005 Directed Electronics, all rights reserved

Page 20 Page 22
Page 21
Image 21
Orion Car Audio HCCA-D1200, HCCA-D2400, HCCA-D5000 manual APPENDIX-PROGRAMMABLE Features
Page 20 Page 22

HCCA-D5000, HCCA-D2400, HCCA-D1200, HCCA-D1200, HCCA-D2400, HCCA-D5000 specifications

Orion Car Audio has long been a respected name in the car audio industry, known for producing powerful and high-quality amplifiers. Among its standout products are the HCCA-D1200, HCCA-D2400, and HCCA-D5000 amplifiers, each designed to deliver exceptional performance and clarity in audio reproduction.

The Orion HCCA-D1200 is a formidable amplifier that offers a power output of 1,200 watts RMS at 1 ohm. It is tailored for those seeking a robust sound system that prioritizes low-frequency performance. This model features a high-efficiency Class D design, enabling it to transmit clean power with minimal distortion. With adjustable gain control, low-pass and subsonic filters, users can easily tailor the sound to suit their preferences.

Moving up in the lineup, the HCCA-D2400 stands as a powerhouse capable of delivering 2,400 watts RMS at 1 ohm. This amplifier is built with a heavy-duty heat sink and high-quality internal components, ensuring durability and reliability even under heavy loads. The HCCA-D2400 is designed with an advanced PWM MOSFET power supply, enhancing the overall efficiency. Its comprehensive crossover system allows for precise audio tuning, catering to both casual listeners and audiophiles.

For those who demand the ultimate in power, the HCCA-D5000 is a top-tier choice. This beast of an amplifier provides an astounding 5,000 watts RMS at 1 ohm, making it ideal for competitive setups and serious bass enthusiasts. The HCCA-D5000 features an ultra-efficient design that minimizes power loss, paired with a low-level input sensitivity that maximizes compatibility with various signal sources. Its built-in protection circuitry safeguards against overheating and short circuits, adding a layer of reliability.

All three models emphasize Orion’s commitment to high-quality construction and innovative technology. They utilize a unique low-frequency response, ensuring that bass notes are rendered with depth and clarity. Together, the HCCA-D1200, HCCA-D2400, and HCCA-D5000 represent an impressive lineup, catering to clients with varying needs and preferences.

Whether enhancing a daily driver or building a competition-grade sound system, the Orion HCCA series amplifiers provide the power, clarity, and reliability that enthusiasts demand. With their striking performance characteristics and user-friendly features, they embody the essence of what Orion Car Audio stands for in the competitive landscape of car audio equipment.
Top Page Image Contents