FULL FLUSH MOUNTING
Step 1: Determine where the tweeter will be mounted. Make sure there is a flat area large enough for the tweeter and no obstructions behind the area.
Step 2: Using supplied template mark with a pen the hole needed for the tweeter.
Step 3: Be sure the hole is large enough for the tweeter housing.
Step 4: Cut the hole for the tweeter. When using factory locations, this step can be skipped. A hole can be cut either with a pair of metal tin snips or a 2" hole saw for soft materials or
WARNING: Check for clearance of window mechanisms and electrical wires BEFORE you drill.
Step 5: Install tweeter in flush mount housing.
Step 6: Connect the speaker wires observing the correct polarity.
Step 7: Install tweeter and housing in the hole cut for mounting, so that the trim ring is flat with the front of the surface.
Step 8: Use the supplied x bracket to secure the housing to the surface.
Flush Mount | Tweeter | X Bracket |
Tweeter Assembly | Cup |
|
| Screw |
|
Figure 2 | Flush Mount | Tweeter |
| Wiring | |
Figura 2 |
| ||||
| Harness | ||||
Abbildung 2 | Trim Ring | Wire | Panel | ||
|
© 2008 directed | 5 |
