AMPLIFIER CALL OUTS
1.Power LED-when lit indicates that the amplifier is on.
2.Output Configuration Switches-determine the output configuration of the amplifier
3.Independent Gain Controls-continuously adjust from 200mV to 5Vrms for full power output
4.RCA inputs-accepts RCA input from a source unit, preamplifier or equalizer
5.AUX RCA outputs-provides easy connection to additional amplifiers.
6.AUX RCA output control-determines the audio signal out the AUX RCAs
7.Low-pass Frequency Control-adjusts the frequency of the low-pass crossover
8.Low-pass Crossover activation switch-activates the low-pass crossover
9.INTELLI Q adjust control-adjusts the “Q” boost of the high-pass crossover
10.High-pass “x10” Frequency range switch- selects the frequency range of the high-pass crossover
13.REM Remote turn-on input-turns on the amplifier when fed 12 V+
14.Speaker Connections-allows up to 12 gauge speaker wire.
15.Remote Gain Control Port-allows dashboard remote gain control.
