STEP BY STEP INSTALLATION

Step 1 Determine the location for the amplifier. Refer to the Mounting Locations section in this manual for detailed information.

Step 2 Decide on the system configuration for your amplifier. For system suggestions, refer to the System Planning section of this manual.

Step 3 Run all the wires from the amplifier location to the speakers, source unit and battery. Do not connect the battery at this time. Be sure to run RCAs, power and speaker wires away from factory electrical wires and system as they pose a great potential for induced system noise.

Step 4 Pre-drill amplifier mounting holes. Be sure to “think before you drill”. Gas tanks, fuel lines, and other obstructions have a nasty way of hiding themselves. For best results use a marking pen to mark the mounting holes and pre--drill these holes with a standard 1/8” drill bit.

Step 5 Mount the amplifier. Make sure the amplifier is mounted on a flat surface. If this is not possible, do not over tighten the screws such that the chassis of the amplifier is twisted or bent.

Step 6 Turn the vehicle’s key switch to the off position.

Step 7 Disconnect the vehicle’s battery ground terminal.

Step 8 Connect the RCA and speaker wires to the amplifier. Check the quality of your speakers and signal connections. This will determine the ultimate performance of your ORION amplifier. Refer to the Installation quick reference section of this manual for correct wiring instructions.

Step 9 Connect power wires to the amplifier. At this time do not connect the fuse at the main battery.

Step 10 Reconnect the ground terminal to the battery.

Step 11 Set crossover and signal routing configurations. Refer to the signal routing switches and the internal crossover configuration sections of this manual for detailed instructions.

Step 12 Once satisfied that all connections and settings are correct, install fuse at location near the vehicle’s battery and proceed to the testing the system section of this manual.

WARNING!!!! Never exceed the recommended fuse size of this amplifier. Failure to do so will result in the void of your warranty.

page 47

Page 47
Image 47
Orion Car Audio XTREME 300, XTREME 800, XTREME 1200, XTREME 400 owner manual Step by Step Installation

XTREME 300, XTREME 400, XTREME 800, XTREME 1200 specifications

Orion Car Audio has consistently pushed the envelope in automotive audio technology, and its XTREME series exemplifies this commitment. With models like the XTREME 1200, XTREME 800, XTREME 400, and XTREME 300, these amplifiers offer a blend of power, efficiency, and advanced features tailored for car audio enthusiasts and casual listeners alike.

The XTREME 1200 stands at the forefront of the series, delivering a robust 1200 watts of peak power. Its Class D design ensures high efficiency, minimizing energy loss and heat generation. This amplifier is equipped with a variable low-pass filter, allowing users to tailor the audio output to their specific subwoofers and preferences. Additionally, its “Smart Protection” circuitry provides an added layer of reliability, safeguarding the unit against overheating and overloading, making it a reliable choice for both daily commutes and high-energy road trips.

Moving down the line, the XTREME 800 brings impressive performance with its 800 watts of peak power. This model retains many core features of its larger counterpart, including adjustable bass boost and low-pass filter settings. Its compact design allows for versatile installation options, making it suitable for a wide range of vehicles. With an aesthetic that blends seamlessly into any car interior, the XTREME 800 also boasts an efficient heat dissipation system, ensuring longevity and consistent performance.

The XTREME 400 is tailored for those who seek a powerful yet compact amplifier. With 400 watts of peak power, it excels in delivering crisp and clear sound without compromising on size. This model features an easy-to-use control interface, allowing for quick adjustments to sound settings. The inclusion of RCA inputs also offers flexibility in integration, supporting various audio sources from smartphones to traditional head units.

Finally, the XTREME 300 is the most compact option in the series, making it perfect for installation in smaller vehicles or tight spaces. Despite its smaller size, the XTREME 300 outputs 300 watts of peak power, providing ample sound enhancement for any audio setup. Its lightweight design makes it easy to install, and it offers a straightforward connection process designed for convenience.

Overall, the Orion Car Audio XTREME series amplifiers cater to a wide spectrum of needs, from casual users seeking improved sound quality to dedicated audiophiles desiring maximum power and customization. Each model in the XTREME lineup underscores Orion's dedication to quality, performance, and user satisfaction. Whether you choose the powerhouse XTREME 1200 or the compact XTREME 300, you can expect exceptional audio performance that transforms your driving experience.