Oster 4749 SIMPLE-TO-USE INSTRUCTIONS FOR MAKING SOFT SERVE AT HOME!!!

SIMPLE-TO-USE INSTRUCTIONS FORMAKING SOFT SERVE AT HOME!!!

1. Mix one bag of pre-mix with 2-1/2 cups of chilled water

(or use one of the enclosed recipes) and mix thoroughly.

2. Remove Soft Serve Mixing Canister from

freezer and place upright on a countertop.

Slide the white mixing auger, solid end

down, slowly into the canister until it rests

snugly on the bottom of the canister (A).

Place the machine's face panel onto the top

of the Mixing Canister (B), making sure

thesilver rod goes into the center of the

mixing auger. Apply downward pressure

as you twist it clockwise to lock it into place (C).

3. Slide the entire assembly into the machine until itclicks into place (D).

4. Turn blue dispensing knob on top of the machine to"FILL" and then

lift the knob to reveal the "fill" opening. IMPORTANT: Turn machine

"ON" before pouring in mixture (you may hear a slight churning

sound during operation; this is normal and simply represents the motor

and gear driving the mixing auger inside the unit).

5. Pour ingredients into the opening (E), close the cap and turn the knob

to the "MIX" position. In 20 – 25 minutes, turn blue dispensing knob to

"Serve" and you'll haveSoft Serve! Do not turn the machine's power

switch to "OFF" until you have finished dispensing all contents of the

Soft Serve Machine.

• When finished dispensing all of the contents of the Soft Serve machine,

turn machine "OFF" and unplug it (while running, the machine will keep

the Soft Serve frozen and ready to dispense for approximately 30 minutes

after the ice cream initially freezes; you can then store any excess

Soft Ser ve in a freezer-safe storage container for later consumption)

Press the blue "Chamber Release" button on top of machine to remove

Mixing Canister assembly. Then twist face panel counter-clockwise to

disassemble Mixing Assembly; turn blue dispensing knob to "Remove"

position and pull up to remove Valve Assembly for cleaning. (If the valve

ever becomes difficult to turn or remove, smooth operation can be

restored by applying a light application of liquid or spray-on cooking oil).

All pieces can then be washed with warm, soapy water (all but Mixing

Canister are top-rack dishwasher-safe). Always make sure Canister is

dried thoroughly before placing in freezer.

CAUTION: NEVER IMMERSE THE MAIN BODY OF THE UNIT IN WATER SINCE THIS

IS WHERE THE MOTOR AND ELECTRICAL COMPONENTS ARE LOCATED;

WATERCAN DAMAGE THEM.

(A)

(B) (C)

(D)

(E)